Product

Products

菜单

产品图-1_画板 1.jpg


Rapid Degradation of BOD/COD

 

Storage Method: Store sealed in a cool, dry, and dark place.

Shelf Life: 12 months

Packaging: 20 kg/drum, 1 kg/bag

Executive Standard: Q/LGL 001-2025

 

• Main IngredientsMesoporous silica nano-hollow spheres, metamaterial photocatalyst, bentonite, enzymatic proteins & polysaccharide metabolites, Bacillus subtilis, Bacillus licheniformis, Bacillus pumilus, etc.

 

• Product FormLight yellow solid powder.

 

• Scope of ApplicationApplicable to various aerated wastewater treatment systems, such as aerobic tanks, oxidation ditches, SBR, contact oxidation tanks, etc. Also suitable for aeration sections of black and odorous rivers.

 

• Application Parameters

Dissolved   Oxygen

2~5 mg/L

pH

6~9

Temperature

15~45 °C

Salinity

≤30,000 mg/L

Optimal   Temperature

28~35 °C



 

• Product EfficacyImproves COD removal rate in aerobic systems, rapidly eliminating organic pollutants. Simultaneously reduces ammonia nitrogen and total phosphorus in water, improving effluent quality.

 

• Usage & Dosage1) Usage: In a bucket, mix at a ratio of Activator : Composite Material : Water = 1 : 10 : 100 (i.e., 100g activator, 1kg composite material, 10L water). Stir evenly and aerate for 2 hours (ensure temperature >20°C, optimal 30°C; if temperature is lower, appropriately extend activation time to 3~5 hours). If aeration is not available on-site, stir every 15 minutes; activation completes after 2 hours, then pour into the aerobic tank. 2) Dosage: 1 kg of composite material can be used for 2~10 m³ of tank volume (or 100~500 g/m³). Specific dosage and frequency should be determined based on site conditions including wastewater type, actual daily treatment volume, and bioreactor capacity.

 

• PrecautionsDo not use disinfectants, antibacterial agents, or strong oxidizers simultaneously with this T-Power 300 Water Treatment Composite Enhancer - B+C. Avoid contact with eyes or inhalation. Treatment conditions vary for different wastewater types. For more information, please consult professional technical personnel.